01017 - dark navy/hi-vis yellow
19879-711-01017
Trousers with kneepad pockets
ACCELERATE SAFE
Trousers
Product information
- Ergonomically shaped trouser legs are constructed to follow the body's natural movements.
- Prepared for holster pockets 19450-126, which are attached with buttons.
- Reinforced ruler pocket.
- The kneepad pockets of durable CORDURA® are adjustable so the kneepads have the optimal position on your knees.
- The water-repellent multifunctional stretch material combines a low weight with a very high durability.
- Ultimate stretch material provides unique freedom of movement and high comfort.
Technical text
- Adjustable hammer loop.
- Adjustable kneepad pockets made from durable CORDURA® (500 D).
- Back pockets with reinforcement.
- Belt loops.
- Button for knife attachment.
- Co-certified together with kneepad type large in accordance with EN 14404-3.
- Double stitched seams on the leg and crotch.
- D-ring.
- Each standard leg length can be lengthened by 3 cm by releasing the internal red stitching.
- Ergonomically formed trouser leg.
- Fluorescent contrast colour with reflective tapes.
- Fly with zip.
- Front pockets.
- Has a water-repellent finish.
- Hidden stud fastening.
- Prepared for holster pockets 19450-126, which are attached with buttons.
- Reinforced ruler pocket.
- Thigh pocket with phone pocket and flap with hook and loop band fastening.
- Thigh pockets with flaps.
- Two-toned.
- ULTIMATE STRETCH fabric that is lightweight and durable.
- With print effects.
Properties
Certifications
Logo
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with a maximum logo area of (82+90 cm) 0,0500 m², (76 cm) 0,0300m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Over left front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo. Over right front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Horizontal on right thigh. Max 9X6 cm/3.5x2.3 inches
- Workwear logo stretch. Horizontal on left thigh. Max 9X6 cm/3.5x2.3 inches
- Workwear logo. Special placement. Contact to discuss further
Treatment & Certificates
Social and Environmental Responsibility
- Fabric in the product is dyed by a supplier who is bluesign®-certified
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Sewn at MASCOTs own factory in Laos or Vietnam
- Sewn at MASCOT’s own factory in Laos
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Produced in Laos by MASCOT’s audited partners
- Product packaging is made from waste from plastic production
- The product packaging is made from or contains recycled materials
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials
