14 - hi-vis orange
11119-880-14
Winter Boilersuit
SAFE ARCTIC
Winter boilersuit
Product information
- Breathable, wind and waterproof MASCOTEX® with taped seams.
- Detachable lined hood with adjustable elastic drawstring.
- Extra long zip with storm flap on outerside of lower leg so they can be easily pulled on over boots.
- Stretch fabric at the back provides extra freedom of movement.
Technical text
- Back pockets with reinforcement, flap and hook and loop band fastening.
- Breathable, wind and waterproof.
- Chest pockets with flap with hook and loop band fastening.
- Detachable lined hood with adjustable drawstring.
- Double stitched seams on the leg and crotch.
- D-ring.
- Fastening with two-way zip, storm flap and press studs.
- Fluorescent with vertical and horizontal reflective tape.
- Front pockets with storm flap.
- Inner pocket - one with zip and one with hook and loop band.
- Lining of quilt in legs and sleeves.
- Pen pocket.
- Phone chest pocket with zip.
- Pile lining in body.
- Rib (hidden in storm flap) and press stud fastening at cuffs.
- Ruler pocket.
- Stretch fabric hidden in back.
- Taped seams.
- Thigh pocket with flap and hook and loop band fastening.
- Zip with storm flap on outerside of lower legs.
Properties



Certifications
Logo
The product is certified with a maximum logo area of 1,3300m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Left breast pocket. Max 7x5 cm/2.7x1.9 inches
- Workwear logo. Right breast pocket. Max 8x5 cm/3.1x1.9 inches
- Workwear logo. Mid-back. Max 28x12 cm/11x4.7 inches
- Workwear logo. On the nape. Max 12x5 cm/4.7x1.9 inches
- Workwear logo. Left back pocket. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Right back pocket. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Horizontal on left thigh. Max 11x5 cm/4.3x1.9 inches
- Workwear logo. Vertical on right thigh, read from the top downwards. Max 25x5 cm/9.8x1.9 inches
- Workwear logo. Horizontal on right thigh. Max 11x5 cm/4.3x1.9 inches
- Workwear logo. Horizontal on right sleeve. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Special placement. Contact to discuss further
Treatment & Certificates
Social and Environmental Responsibility
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Sewn at MASCOTs own factory in Laos or Vietnam
- Lining fabric is made from 35-40 % recycled polyester
- Sewn at MASCOT’s own factory in Vietnam
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Produced in Laos by MASCOT’s audited partners
- Product packaging is made from waste from plastic production
- The product packaging is made from or contains recycled materials
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials









