141 - hi-vis orange/navy
09335-880-141
Winter Jacket
SAFE COMPETE
Winter jacket
Product information
- Breathable, windproof and water-repellent.
- Extra protection against the cold with an extended back.
- Multi-function jacket that can be adapted to the situation - includes both shell jacket, shell gilet, thermal jacket and thermal gilet.
- Press studs to attach a hood if required.
- Quilted lining is a jacket in itself, approved to EN ISO 20471, with ribbed collar and removable sleeves.
Technical text
- 09335-880 is a winter jacket certified to EN ISO 20471 - class 3, outer shell jacket certified to EN ISO 20471 - class 3, outer shell gilet certified to EN ISO 20471 - class 2, thermal jacket certified to EN ISO 20471 - class 3 and thermal gilet certified to EN ISO 20471 - class 1 all in one - perfect for all weather conditions.
- Breathable, windproof and water-repellent.
- Chest pockets with flap with hook and loop band fastening.
- D-ring.
- Extended back.
- Fastening with zip, storm flap and hidden press studs.
- Fluorescent with vertical and horizontal reflective tape.
- Front pockets.
- Hood press studs.
- Inner collar of soft, durable material.
- Pen pocket.
- Phone chest pocket with zip.
- Press stud adjustment at waist.
- Quilt lining can zip out and be used separately - has ribbed collar and pockets.
- Removable sleeves.
- Rib (hidden in storm flap) and press stud fastening at cuffs.
- Supplement the product with a hood, 05114-880 (see MASCOT® COMPLETE).
- The fluorescent jacket is approved to EN ISO 20471 and has vertical and horizontal reflectors.
- The lining is also a separate jacket that can be worn alone.
- Two-toned.
- Zipped pocket under storm flap.
Properties
Certifications
Logo
The product is certified with a maximum logo area of 0,0200m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Over left breast pocket. Max 8x3 cm/3.1x1.1 inches
- Workwear logo. Left breast pocket. Max 7x5 cm/2.7x1.9 inches
- Workwear logo. Over right breast pocket. Max 8x3 cm/3.1x1.1 inches
- Workwear logo. Right breast pocket. Max 8x5 cm/3.1x1.9 inches
- Workwear logo. Top of back. Max 25x8 cm/9.8x3.1 inches
- Workwear logo. Mid-back above reflector. Max 28x13 cm/11x5.1 inches
- Workwear logo. Horizontal on right sleeve. Max 7x3 cm/2.7x1.1 inches
- Workwear logo. Special placement. Contact to discuss further
Treatment & Certificates
Social and Environmental Responsibility
- Fabric in the product is dyed by a supplier who is bluesign®-certified
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Sewn at MASCOTs own factory in Laos or Vietnam
- Lining fabric is made from 35-40 % recycled polyester
- Sewn at MASCOT’s own factory in Laos
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Produced in Laos by MASCOT’s audited partners
- Product packaging is made from waste from plastic production
- The product packaging is made from or contains recycled materials
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials
