14010 - hi-vis orange/dark navy
15501-231-14010
Outer Shell Jacket
SAFE SUPREME
Outer shell jacket
Product information
- Breathable, wind and waterproof with taped seams.
- Durable CORDURA® - reinforcement at the wrist to extend product life.
- Mesh with ventilation under the sleeves - opens with zip.
- Reinforcements inside the jacket, so the lining does not tear when you have tools in the trouser pockets.
- Waterproof extension at the back that can be folded down in the rain and cold.
Technical text
- Adjustable wire on both sides of the hood.
- Breathable, wind and waterproof.
- Chest pocket with a zip.
- CORDURA® fabric reinforced cuffs with press stud fastening.
- Detachable lined hood can be adjusted to fit over a helmet via drawstring.
- D-ring.
- Ergonomically shaped sleeves allow for great freedom of movement.
- Fastening with zip and storm flap with press studs.
- Flap on back of jacket can be folded up for standard back length or released for extended back.
- Fluorescent, with vertical and oblique transverse reflective strips.
- Front pockets with a zip.
- High collar.
- Lining in mesh material.
- Mesh with ventilation under sleeves - opens with zip.
- Ribbed inner collar.
- Ribbed inner waistband to keep the cold out.
- Taped seams.
- Two-toned.
- Waterproof pen pocket on the sleeve.
- Zipped inner pockets under storm flap - one designed especially for a mobile with holes for headset wire and guide loops to keep wire accessible.
- Zipped pocket under storm flap large enough to hold a 7-inch tablet.
Properties
Certifications
Logo
The product is certified with a maximum logo area of 0,0400m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Left breast. Max 8x7 cm/3,1x2.7 inches
- Workwear logo. Mid-back. Max 25x20 cm/9.8x7.8 inches
- Workwear logo. Horizontal on right sleeve. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Special placement. Contact to discuss further
Treatment & Certificates
Social and Environmental Responsibility
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Sewn at MASCOTs own factory in Laos or Vietnam
- Sewn at MASCOT’s own factory in Laos
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Produced in Laos by MASCOT’s audited partners
- Product packaging is made from waste from plastic production
- The product packaging is made from or contains recycled materials
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials
