14 - hi-vis orange
19249-510-14
Shorts, long
ACCELERATE SAFE
Shorts
Product information
- Ruler pocket with Kevlar® reinforcement - particularly resistant to pointed and sharp objects.
- The product tolerates industrial washing.
- The water-repellent multifunctional stretch material combines a low weight with a very high durability.
- Ultimate stretch material provides unique freedom of movement and high comfort.
Technical text
- Back pockets with reinforcement.
- Belt loops.
- Detachable ID card holder.
- Double stitched seams on the leg and crotch.
- Fluorescent with reflective tape.
- Fly with zip.
- Front pockets.
- Has a water-repellent finish.
- Hidden stud fastening.
- Hidden tool strap on right side.
- Lightweight.
- Prepared for holster pockets 19450-126, which are attached with buttons.
- Ruler pocket with Kevlar® reinforcement.
- The polyester is made from recycled resources.
- Thigh pocket with lined telephone pocket, hidden press stud fastening and integrated ID card holder.
- Thigh pockets with flaps.
- ULTIMATE STRETCH fabric with extra low weight and high wear resistance.
- Without print effects.
Properties
Certifications
Logo
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with a maximum logo area of (C44-C46) 0,3600 m², (C47-C68) 0,0300m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Over left front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo. Over right front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo. Special placement. Contact to discuss further
Social and Environmental Responsibility
- Dyed using technology that applies less water, fewer chemicals and emits less CO₂ compared with traditional dyeing
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- Content of recycled polyester from certified partner
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Sewn at MASCOTs own factory in Laos or Vietnam
- Lining fabric is made from 35-40 % recycled polyester
- Sewn at MASCOT’s own factory in Vietnam
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Produced in Laos by MASCOT’s audited partners
- The product packaging is made from or contains recycled materials
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials
