14010 - hi-vis orange/dark navy
19090-449-14010
Winter Trousers
ACCELERATE SAFE
Winter trousers
Product information
- Breathable, wind and waterproof with taped seams.
- Ergonomically shaped trouser legs are constructed to follow the body's natural movements.
- Raised back piece provides support and extra protection against cold and wind.
- Ruler pocket with Kevlar® reinforcement - particularly resistant to pointed and sharp objects.
- Snow locks inside the leg to keep snow and dirt out.
- The kneepad pockets of durable CORDURA® are adjustable so the kneepads have the optimal position on your knees.
- Unique CLIMASCOT® insulation provides warmth without bulk. Lightweight, soft CLIMASCOT® insulation takes up almost no space when compressed.
- Very durable.
Technical text
- Adjustable kneepad pockets made from durable CORDURA® (500 D).
- Back pockets with reinforcement and flaps.
- Belt loops.
- CLIMASCOT® Lightweight Insulation.
- Co-certified together with kneepad type large in accordance with EN 14404-3.
- Detachable ID card holder.
- Ergonomically formed trouser leg.
- Fluorescent with reflective tape.
- Fly with zip.
- Front pockets.
- Hidden tool straps on both sides.
- Ruler pocket with Kevlar® reinforcement.
- Snow flap on the inside of leg.
- Strong, elastic, detachable, adjustable braces.
- Taped seams.
- The fabric is highly durable, breathable, wind and waterproof.
- The waistband is higher at the back, to better protect against the cold.
- Thigh pocket with lined phone pocket, magnet fastening and integrated ID card holder.
- Thigh pockets with flaps.
- Two-toned.
- Waist with elasticated sides.
- Zip with storm flap on inside of lower legs.
Properties





Certifications
Logo
You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with a maximum logo area of 0,1900m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Over left front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo. Over right front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Horizontal on right thigh. Max 9X6 cm/3.5x2.3 inches
- Workwear logo stretch. Horizontal on left thigh. Max 9X6 cm/3.5x2.3 inches
- Workwear logo. Special placement. Contact to discuss further
Treatment & Certificates
Social and Environmental Responsibility
- Lining fabric, CLIMASCOT®, is made from 35% recycled polyester
- Content of organic cotton from certified partner
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Fabric in the product is dyed by a supplier who is bluesign® and EN ISO 14001-certified
- Lining fabric is made from 35-40 % recycled polyester
- Sewn at MASCOT’s own factory in Vietnam
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Produced in Laos by MASCOT’s audited partners
- Product packaging is made from waste from plastic production
- The product packaging is made from or contains recycled materials
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials
















